GX10/K10D Repair

From Tomelec
Revision as of 10:14, 13 October 2011 by Tom (talk | contribs)

Jump to: navigation, search

I currently got a non working Samsung GX10 digital camera (DSLR). It turned out, that the GX10 is almost the same camera as the Pentax K10D. This promised a huge variety of how to´s and documents. Unfortunately I could not find that much information online.

The Defect

The camera refuses to take any pictures. When pressing the shutter release button, a rumbling noise can be heard and felt. It´s prduced by the moving SR block which carries the CCD sensor and reduces shocks while exposure. This noise is normal but hard to hear in a functional camera, because the mirror/shutter is much louder. Not in this faulty camera: The mirror is not moving a bit when pressing the release button. No mirror or shutter movement, also no noises from a blocked motor or electric magnet. The camera does not show any error messages. Everything works as normal but taking a picture is impossible.

OK, let´s take a look inside ...

Finding The Reason

I removed the bottom of the camera´s housing first, then the rest of it. Of course I touched the supply voltage for the flash which can be quite painful. Discarge the flash before proceeding!

I pushed the release button several times and noticed that the lower right corner of the main PCB was getting very hot. What´s wrong with it?

The heat came from a motor driver IC